Stainless steel strip collated deck screws for autofeed screw guns

Collated Deck Screws.
To fit the following automatic screw guns
Pam P13KDE,
Senco DS300-AC,
Makita 6834
Milwauki Straightshooter
Grabber SuperDrive 75

Click here to see our enormous range of Quik Drive Collated screws

#8 or #10 302 or 316 Stainless steel. Square Drive
Type 17 Point
Bugle Head

Here's a great stainless fastener for wood joints exposed to the weather, drywall, decks and sub floors. Conceived and engineered expressly for projects which call for the superior corrosion resistance of stainless steel combined with maximum holding power and ease of use.

Shopping Cart Help

Click here for image. SS collated Deck screws for automatic feed screw guns
SIZE	Part #	Price	Qty
SS 302 - #8 x 2.1/2 inch with #2 square drive 1000 pack	WDSS8212	$135
SS 302 - #8 x 2.1/2 inch with #2 square drive 6000 pack	WDSS8212	$695
SS 302 - #10 x 2.1/2 inch with #2 square drive 1000 pack	WDSS10212	$255
SS 302 - #10 x 2.1/2 inch with #2 square drive 6000 pack	WDSS10212	$1329
SS 316 - #10 x 3 inch with #3 square drive 1000 pack	WDSS1003	$280
SS 316 - #10 x 3 inch with #3 square drive 6000 pack	WDSS1003	$1465
Bits to fit: Pam P13KDE
5 pack of #2 square bits	2140	$18
5 pack of #3 square bits	3140	$18
Bits to Fit Grabber SuperDrive 75
5 pack of #2 square bits for Grabber tool	CW178Q	$18

Click here for a great offer on the PAM P13KDE Automatic Screw Gun

For composite decking screws click here

Common applications
• Crating • Concrete forms • Cargo trailers • Pontoon boats	• Decking • Subfloors • Cement fiberboard • Tile roofing

Deck Builders - Calculate the amount of screws or nails you will need

Size of Board	Joist centers	Fasteners per sq ft	Fasteners per joist	Fasteners per 100 square Feet
4" Boards	16 inch OC	5.25	(2 per joist)	525
4" Boards	20 inch OC	3	(2 per joist)	300
6" Boards	16 inch OC	3.5	(2 per joist)	350
6" Boards	20 inch OC	2	(2 per joist)	200
The above is approximate and does not take into account wastage. The shorter your boards the more screws you will need to allow for fastening the ends of the boards. Add 2 extra fasteners for every board. Bits - order 1 bit per 1000 screws