Fasteners For Siding

Wood Siding Nails
304 Stainless or 316 Stainless Steel

• Small Flat Head
• Blunt Diamond Point

*********************************

Shake & Shingle Nails
304 Stainless Steel

• Slender Shank
• Annular Thread

*********************************

Decorative "Pyramid Head" Siding Nails
Silicon Bronze or 316 Stainless Steel

• Annular Ring Thread
• Blunt Diamond Point

*********************************
"Portlands" Fiber Cement SidingNails"
316 Stainless Steel

• Annular Ring Thread
• Sharp Diamond Point
• Checker Pattern Head

**********************************
Fasteners For Decking
Cedar & Redwood Decking Nails
304 Stainless Steel

• Small Flat Head
• Annular Ring Thread

****************************
Decking Nails For Pressure Treated Lumber
304 Stainless or 316 Stainless Steel

• Checker pattern Sinker Heads
• Blunt Diamond Point
• Annular Ring or Screw Shank

******

****************************

Beaver Bite Wood Screws For Outdoor Construction
With The "Beaver Bite" Point
Here's a very good fastener for wood joints exposed to the weather. Conceived and engineered for building cedar and redwood decks, but are equally well suited for any number of outdoor construction projects which call for superior corrosion resistance combined with maximum holding power and ease of use.

• Self-countersinking bugle head sets flush with work surface
• Square Drive recess is deep and cleanly formed - eliminates driver bit cam-out
• New and improved "Beaver Bite" point. Precision machined self-drilling point drills its way into all types of wood by removing material during penetration
• Self-tapping coarse threads are uniformly sharp - require less driving torque
• Coated with non-stick clear, dry lubricating film to enhance driveability

*********************************
Roofing Fasteners
Roofing Nails (Slating Nails)
Copper or 304 or 316 Stainless Steel

Large Flat Head

• Smooth Shank
• Diamond Point

****************************
Copper Tile Nails
Long Copper Nails For Spanish Roof Tiles

• Large Flat Head
• Smooth Shank
• Diamond Point

****************************
Washered Roofing Nails
304 Stainless Steel

• Annular Thread
• Large Checkered Head
• Heavy EPDM Washers Assembled

*********************************
Structural Nails
"Un-Commons"
304 Stainless or 316 Stainless Steel

• Smooth Shank or Threaded
• Flat Head
• Diamond Point

****************************
Post & Beam Nails
Stainless Steel or Bronze

• Smooth Flat Head
• Diamond Point
• Annular Ring or Screw Shank

****************************
Box Nails
304 Stainless or 316 Stainless Steel

• Slender Shank
• Checkered Flat Head
• Annular Ring or Screw Shank
• Diamond Point

****************************

Special Purpose Nails
Joist Hanger Nails
304 Stainless or 316 Stainless Steel

• Smooth Shank

****************************
Stainless Steel Fence Nails
304 Stainless Steel

• Checker Pattern Head
• Annular Ring Thread

****************************
Finishing Nails
304 or 316 Stainless Steel

• Brad Head
• Smooth Shank
• Diamond Point

****************************
"Sea-Cure" Nails For Marine Service
304 Stainless or 316 Stainless Steel

• Large Flat Head
• Annular Ring Thread
• Diamond Point

****************************

Stainless Steel Plastic Cap Nails

Available on special order basis with minimum order of 25,000 pieces.

• One inch diameter round plastic caps
• 11 guage nails (.120" dia.) in lengths from 1" to 1³/₄"
• Recommended for use in fastening plastic composite panels to wood framing in livestock confinement structures or chemical storage areas.

Special Sizes, Heads, Points

• A broad range of length and gauge combinations not shown here is either in stock or can be manufactured on short notice.
• A number of alternate nail head and point styles is also available on a special order basis.
• 25 lb. minimum order on non-stock nail products.

****************************
Permanent Wood Foundation Nails
304 Stainless or 316 Stainless Steel

• Smooth Shank or Annular Ring Thread

********************************
Pins, Brads, Tacks

Brass Escutcheon Pins

• Oval Head
• Diamond Point

****************************

Brass Wire Brads

• Brad Head
• Diamond Point

****************************

Copper Cut Tacks

• In One Pound Boxes

****************************
Miscellaneous

Plastic Hammer Caps

• Recommended when driving pre-painted nails to preserve the finish.
• Prevents chipping of color coated nails and guards against overdriving.
• Accepts a wide variety of 16 and 20 oz. hammer faces.

****************************
Stainless Steel Hog Rings & Fence Staples

• Limited sizes available from stock.
• Call for details.

Nail/Washer Assemblies
304 Stainless or 316 Stainless Steel Nails assembled with 302 Stainless Steel and Neoprene bonded sealing washers

********************************
Beaver Bite Screw/Washer Assemblies
305 Stainless Steel  Finishing Screws assembled with 302 Stainless Steel and Neoprene bonded sealing washers

SHARX™ Stainless Steel Screws with Teeth
316 Stainless Steel
A revolutionary high-low threadform incorporates special indentations - teeth - which bite fast and hold tight in most materials. SHARX™ are manufactured of high-nickel 316 Stainless Steel alloy making them ideal for marine use and seaside applications. Type 316 contains more nickel than type 304 and about 2.5% molybdendum, giving it better resistance to pitting, discoloration and stress-corrosion cracking in high chloride environments than conventional 18-8 stainless steel alloys.

• Extra Sharp Points speed screw starts during assembly
• Flat, Pan, and Oval Head Styles for all application requirements

• Phillips Drive for use with hand driver. Predrilling recommended
  
  Stainless Drive Nails
  304 Stainless Steel
  

• Low Oval Head
• Spiral or Annular Thread
• Diamond Point